No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication general_trace

show remote_replication general_trace


The show remote_replication general_trace command is used to show the general tracing information about a remote replication.


show remote_replication general_trace pair_id=? [ controller=? ]






Remote replication ID.

To obtain the value, run "show remote_replication unified".


ID of the controller.

The value is in the format of XA or XB. X is an integer ranging from 0 to the value of the number of controller pairs minus 1.


Developer view

Usage Guidelines



To show the general tracing information about remote replication "e09796543d250005", run the following command.

developer:/>show remote_replication general_trace pair_id=e09796543d250005 controller=0B 
Start Time Opcode Task Name Success Count Fail Count Status 
----------------------------- --------- ----------------------- ------------- ---------- ------- 
2015-05-04/11:29:10 UTC+08:00 5 OPCODE_START_SYNC 2 1 success 
2015-05-04/11:29:14 UTC+08:00 6 OPCODE_SYNC_COMPLETE 2 0 success 
2015-05-04/11:26:38 UTC+08:00 7 OPCODE_PAIR_INTERRUPT 2 0 success 
2015-05-04/10:36:27 UTC+08:00 16 OPCODE_PRE_START_DS_SVC 1 0 success 
2015-05-04/10:36:28 UTC+08:00 17 OPCODE_START_DS_SVC 1 0 success 
2015-05-04/10:36:28 UTC+08:00 18 OPCODE_START_BGR_SVC 1 0 success 
2015-05-04/10:36:35 UTC+08:00 22 OPCODE_SMOOTH 1 0 success

System Response

The following table describes the parameter meanings.



Start Time

Execution start time.


Operation code ID.

Task Name

Task name.

Success Count

Success count.

Fail Count

Failure count.


Current execution status.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 756139

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next