No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa queryinitext

spa queryinitext

Function

The spa queryinitext command is used to query the extents to be initialized.

Format

spa queryinitext -p pool id -l lun id -e extent id -n extent number

Parameters

Parameter

Description

Value

pool id

Disk domain ID.

The ID can be obtained by running the show disk_domain general command in super administrator mode.

lun id

LUN ID.

The ID can be obtained by running the show lun general command in super administrator mode.

extent id

Searched extent ID.

-

extent number

Number of extents to be queried.

-

Views

Diagnostic view

Usage Guidelines

This command must be run on the working controller of the LUN.

Example

Query the information of extents to be initialized in disk domain 0. The LUN ID of the extent to be initialized is 0. The searched extent ID is 0x2efe. The number of the extent to be queried is 2.

admin:/diagnose>spa queryinitext -p 0 -l 0 -e 0x2efe -n 2 
Need Init Extent Num: 0x2 
Extent ID : 0x2efe 
Extent ID : 0x2eff

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Need Init Extent Num

Number of extents to be initialized.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 665954

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next