No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pair showSyncStatics

pair showSyncStatics


The pair showSyncStatics command is used to query statistics about operations on the file object during synchronization.


pair showSyncStatic pairID






Pair object ID.

To obtain the value, run the "pair showobjs" command.


Diagnostic view

Usage Guidelines

Query file copy information during the file copy process.


  • Query statistics about operations on file objects of the pair whose ID is "0" during incremental synchronization.
    admin:/diagnose>pair showSyncStatics 0 
    Now it is resync. 
      read     objectnum                    : 9
  • Query statistics about operations on file objects of the pair whose ID is "1" during initial synchronization.
    admin:/diagnose>pair showSyncStatics 1 
    Now it is initial sync. 
      listed  objectnum                     : 240             
      opened  objectnum                     : 240             
      read objectnum                  : 52

System Response

The following table describes the parameter meanings.



read objectnum

Number of obtained objects.

listed objectnum

Number of opened objects.

opened objectnum

Number of objects that have been read.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 725851

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next