No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear nfs connection

clear nfs connection

Function

The clear nfs connection command is used to close the specified NFS connection.

Format

clear nfs connection [ server_ip=? ] [ client_ip=? ] [ client_port=? ] [ controller=? ]

Parameters

Parameter

Description

Value

server_ip=?

IP address of the server.

IPv4 or IPv6 address.

client_ip=?

IP address of the client.

IPv4 or IPv6 address.

client_port=?

ID of the client port.

The value ranges from 1 to 65535.

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

Close the NFS connection.

developer:/>clear nfs connection controller=0A server_ip=192.168.40.87 
WARNING: You are about to disconnect the NFS service network of the client. This operation may interrupt client NFS services. 
Suggestion: Confirm that you know about the impact before running this command. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 561808

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next