No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reboot expansion_module

reboot expansion_module

Function

The reboot expansion_module command is used to reset specific expansion modules.

Format

reboot expansion_module expansion_module_id=?

Parameters

Parameter

Description

Value

expansion_module_id=?

Expansion module ID.

To obtain the value, run "show expansion_module". The value contains 1 to 31 characters, including letters, digits, and periods (.). The value cannot start with a digit or a period (.), or end with a period (.).

Views

Developer view

Usage Guidelines

  • Run show expansion_module to query information about all the expansion modules.
  • Run reboot expansion_module expansion_module_id=? to reset a specific expansion module.
  • The expansion module is reset one minute after the command is executed.

Example

Resetting expansion module "DAE030.A".

developer:/>reboot expansion_module expansion_module_id=DAE030.A 
DANGER: You are about to reboot the expansion module. This operation causes the performance fluctuation of some disks or service termination. 
Suggestion: Before performing this operation, stop services running on the service ports of the controller to which the expansion module belongs. You are strongly advised not to reboot the expansion module when the expansion module is working correctly. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 664361

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next