No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete snapshot_rsstype

delete snapshot_rsstype

Function

The delete snapshot_rsstype command is used to forcibly delete the snapshot property of a specified LUN.

Format

delete snapshot_rsstype source_lun_id=?

Parameters

Parameter

Description

Value

source_lun_id=?

Source LUN ID of the snapshot to be forcibly deleted.

To obtain the value, run "show snapshot general".

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance.
  • This command can only be used when a snapshot with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.

3.This command must be used with the "delete snapshot_db" command. Restart the system after running the commands.

Example

To delete the snapshot property of LUN 0, run the following command.

developer:/>delete snapshot_rsstype source_lun_id=0 
DANGER: You are about to delete the snapshot properties of a specified LUN. This operation will forcibly delete the LUN properties of snapshot. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 555145

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next