No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvsascbb getfwinfo

drvsascbb getfwinfo

Function

The drvsascbb getfwinfo command is used to collect internal logs of the SAS chip in a specified slot.

Format

drvsascbb getfwinfo card_id=?

Parameters

Parameter

Description

Value

card_id=?

Slot ID of the SAS interface module.

The value is an integer ranging from "0" to "11".

Views

Diagnostic view

Usage Guidelines

None

Example

Collect internal logs of the SAS chip in a specified slot.

admin:/diagnose>drvsascbb getfwinfo card_id=0 
card:0 dump fw log success!

System Response

The following table describes the parameter meanings.

Parameter

Meaning

card

Module ID.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 669252

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next