No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system repair

show file_system repair

Function

The show file_system repair command is used to check the modification results of a file system.

Format

show file_system repair file_system_id=? [ policy=? ] [ controller=? ]

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

The value ranges from 0 to 65535.

policy=?

Repair policy.

The value is "consistency_repair" , "isolation_recovery" or "volume_extent_repair", where:

  • "consistency_repair": indicates consistency repair.
  • "isolation_recovery": indicates object isolation recovery.
  • "volume_extent_repair":indicates extent repair.

controller=?

Indicates the owning controller of the file system.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.

Views

Developer view

Usage Guidelines

None

Example

  • To check the consistency repair modification results of a file system, run the following command.
    developer:/>show file_system repair file_system_id=0 policy=consistency_repair controller=0A 
    File System ID:0  
    Policy:Consistency Repair  
    Type:Repair Confirm  
    Consistency Point:-- 
    Backfs ID:-- 
    Force Enabled:Disable Force  
    Repairstatus:The repair has been confirmed.  
    Reason:-- 
    Suggestion:-- 
    Successful Consistency:-- 
    Time:--
  • To check the extent modification results of a file system, run the following command.
    developer:/>show file_system repair file_system_id=1 policy=volume_extent_repair controller=0A 
    File System ID : 1  
    Policy : Volume Extent Repair  
    Type : Repair  
    Repair Method : EXTTREE Repair  
    Total Step : 5  
    Current Step : 2.Backup root extent  
    Remaining Time(min) : --  
    Result : SUCCESS

System Response

The following table describes the parameter meanings.

Parameter

Meaning

File System ID

File system ID.

Policy

Repair policy.

Type

Repair operation.

Consistency Point

Consistency point.

Backfs ID

Backup file system ID.

Force Enabled

Forcible repair.

Repairstatus

Repair status.

Reason

Reason.

Suggestion

Suggestion.

Successful Consistency

Successful Consistency Point.

Time

Consistency Point Time of Successful Rollback.

Repair Method

Repair method.

Total Step

Total step.

Current Step

Current step.

Remaining Time(min)

Remaining time.

Result

Repair result.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 754013

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next