No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show space task_flow_info

show space task_flow_info

Function

The show space task_flow_info command is used to query the execute info of control task in space module.

Format

show space task_flow_info type=? controller=? [ task_id=? ]

Parameters

Parameter

Description

Value

type=?

Indicates the query range.

The value can be: "all", "error", "id".

controller=?

Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

task_id=?

Indicates the task ID.

To obtain the value, run the "show space task_flow_info type=all" command.

Views

Developer view

Usage Guidelines

  • Enter "type=all" to batch query all tasks, without "task_id" inputting.
  • Enter "type=error" to batch query the tasks of error occurred, without "task_id" inputting.
  • Enter "type=id" to batch query the specified task, and the "task_id" must be entered.

Example

  • To query all task flow, run the following command.
    developer:/>show space task_flow_info type=all controller=0A 
      
      Execute Time         Task/Command Code                  Task/Command ID  File System ID  Return  Time        
      -------------------  ---------------------------------  ---------------  --------------  ------  --------- 
      2015-07-27 16:57:54  SPC_TASK_CREATE_MEM_OBJECT         2                0               Ok      619406      
      2015-07-27 16:57:54  SPC_TASK_INIT_VOLUME               4                0               Ok      80571235 
      2015-07-27 16:57:54  SPC_TASK_INIT_FS                   5                0               Ok      5898490     
      2015-07-27 16:57:54  SPC_TASK_START_CACHE_DESTAGE       7                0               Ok      38675       
      2015-07-27 16:57:54  SPC_TASK_STOP_CACHE_DESTAGE        8                0               Ok      68327       
      2015-07-27 16:57:54  SPC_TASK_SET_WORK_CONTROLLER       9                0               Ok      80020       
      2015-07-27 16:57:54  SPC_TASK_SET_CKG_WORK_CONTROLLER 10               0               Ok      66104       
      2015-07-27 16:57:54  SPC_TASK_SET_CACHE_PTT_ID          13               0               Ok      47793       
      2015-07-27 16:57:54  SPC_TASK_LOAD_VOLUME               16               0               Ok      4166381     
      2015-07-27 16:57:54  SPC_TASK_LOAD_FS                   17               0               Ok      26871       
      2015-07-27 16:57:54  SPC_TASK_CREATE_START_SPC_BGR_SRV  21               0               Ok      256863466 
      2015-07-27 16:57:55  SPC_TASK_START_SPC_BGR_TASK        33               0               Ok      98037
  • To query task flow with error occurred, run the following command.
    developer:/>show space task_flow_info type=error controller=0A 
      
      Execute Time         Task/Command Code                  Task/Command ID  File System ID  Return  Time 
      -------------------  ---------------------------------  ---------------  --------------  ------  --------- 
      2015-07-27 16:57:54  SPC_TASK_INIT_FS                   5                0               Error 6326750
  • To query the task flow of task_id "2", run the following command.
    developer:/>show space task_flow_info type=id controller=0A task_id=2 
      
      Execute Time         Task/Command Code                 Task/Command ID  File System ID  Return  Time     
      -------------------  --------------------------------  ---------------  --------------  ------  ------ 
      2015-07-27 16:57:54  SPC_CMD_CREATE_UB_MEM_OBJECT      140            0               Ok      6924     
      2015-07-27 16:57:54  SPC_CMD_CREATE_OBS_MEM_OBJECT     69               0               Ok      111052 
      2015-07-27 16:57:54  SPC_CMD_CREATE_DDUP_MEM_OBJECT 70               0               Ok      155720 
      2015-07-27 16:57:54  SPC_CMD_SET_DDUP_SMART_CACHE_CFG  151              0               Ok      2838     
      2015-07-27 16:57:54  SPC_CMD_CREATE_ALLOCATOR          156              0               Ok      108425 
      2015-07-27 16:57:54  SPC_CMD_CREATE_VOLS_MEM_OBJECT 71               0               Ok      164556 
      2015-07-27 16:57:54  SPC_CMD_CALLBACK_CONFIG_TASK      21               0               Ok      1326  

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Execute Time

Indicates start time of the task.

Task/Command Code

Indicates the task or command code.

Task/Command ID

Indicates the task or command ID.

File System ID

Indicates the file system ID.

Return

Indicates the execution result.

Time

Indicates the task execution duration..

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 663922

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next