No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Qos show system_info

Qos show system_info

Function

The Qos show system_info command is used to view the system information about QOS.

Format

Qos show system_info

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the system information about QOS.

admin:/diagnose>Qos show system_info 
----------------------CPU INFO------------------------ 
Current CPU usage                      : 9  
--------------------LICENSE INFO---------------------- 
QoS license check flag                 : On 
QoS license valid function number      : 1 
QoS license valid resource number      : 0 
QoS used license capacity              : 0 GB 
QoS max license capacity               : 1024000000 GB 
---------------SUBMODULE SWITCH INFO------------------ 
Io class and CPU control function flag : On 
Io statistic function flag             : On 
Front concurrent function flag         : Off 
BDM delay function flag                : Off 
---------------------NODE INFO------------------------ 
Cluster master id                      : 0 
Self node id                           : 1 
Configured node num                    : 2 
Online node bitmap                     : 3 
---------------------WORK STATUS---------------------- 
QoS work all ready or not              : Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

CPU INFO

The information of cpu.

LICENSE INFO

The information of license.

SUBMODULE SWITCH INFO

The switch information of sub module.

NODE INFO

The information of nodes.

WORK STATUS

The information of work status.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 701544

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next