No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dlm startwork

show dlm startwork

Function

The show dlm startwork command is used to view DLM startup information.

Format

show dlm startwork controller=?

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

None

Example

View DLM startup information.

developer:/>show dlm startwork controller=0A 

  Sequence  Step Name            Return Code  Retry Count  Finish Time           
  --------  -------------------  -----------  -----------  ------------------- 
  0         create db         :  2            8            2015-09-15 08:26:25 
  1         open db           :  0            1            2015-09-15 08:26:25 
  2         insert first event:  5            1            2015-09-15 08:26:25 
  3         insert first dir  :  5            1            2015-09-15 08:26:25 
  4         subscribe dir     :  0            1            2015-09-15 08:26:25 
  5         subscribe event :  0            1            2015-09-15 08:26:25 
  6         get event version :  0            1            2015-09-15 08:26:25 
  7         get dir version :  0            1            2015-09-15 08:26:25

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Sequence

Sequence number.

Step Name

Step name.

Return Code

Return code.

Retry Count

Count of retries.

Finish Time

Completion time.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 754132

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next