No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The sysforcepoweron command is used to set the forcible power-on switch of the system control module.


sysforcepoweron [ switch flag ]





switch flag

Forcible power-on switch flag.

The value is 0 or 1.

  • 0: open, indicates that the switch is on. Some check items are ignored when the system control module powers on the system and the system will be forcibly powered on.
  • 1: close, indicates that the switch is off.


Minisystem mode

Usage Guidelines

  • After this command is executed, the memory fault check during power-on will be skipped.
  • The power-on may fail due to inconsistent memory.
  • The forced power-on may result in service interruption.


Set the forcible power-on switch of the system control module.

Storage: minisystem> sysforcepoweron 0 
admin:/diagnose>sys setforcepoweronswitch 0 
Set force power on switch flag : open. 
Storage: minisystem> sysforcepoweron 1 
admin:/diagnose>sys setforcepoweronswitch 1 
Set force power on switch flag : close. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 756202

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next