No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot_cp0

uboot_cp0

Function

The uboot_cp0 command is used to copy U-Boot to flash.

Format

uboot_cp0

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Copy U-Boot to flash.

Hi1710_UBOOT> uboot_cp0                                                                                                              
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the  
PCB cannot work normally.                                                                                                            
erase flash from :40000000 to :4007ffff,please wait a while                                                                          
- Warning: 4 protected sectors will not be erased!                                                                                   
 done                                                                                                                                
Erased 4 sectors                                                                                                                     
Copy u-boot to flash,please wait a while                                                                                             
 Clean env from flash,please wait a while                                                                                            
 erase flash from :401e0000 to :401fffff,please wait a while                                                                         
- Warning: 1 protected sectors will not be erased!                                                                                   
 done                                                                                                                                
Erased 1 sectors                                                                                                                     
Protect Flash Sectors 0-15 in Bank # 1                                                                                               

Success to load u-boot0.please update uboot0 and uboot1 in a uboot update process.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 717509

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next