No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fdsa check_item_switch

change fdsa check_item_switch


The change fdsa check_item_switch command is used to enable or disable a specified check item in the Fault Detecting & Self-Healing Architecture (FDSA). After a check item is enabled, this item can be checked by the FDSA.


change fdsa check_item_switch check_item_name=? check_item_switch=?






Indicates the name of a check item.

The value contains 1 to 127 ASCII characters, including numbers, letters, underscores(_), dots(.) and space( ).


Indicates the switch of a check item.

The value can be "on" or "off", where,

  • "on": The FDSA function is enabled.
  • "off": The FDSA function is disabled.


Developer view

Usage Guidelines

You can run the show fdsa check_item_switch command to view all check item information including the names and switch states of check items, and run the change fdsa check_item_switch command to change the switch state of a specified check item.


Enable the Vol_Res_Heal item to be checked.

developer:/>change fdsa check_item_switch check_item_name=Vol_Res_Heal check_item_switch=on 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 759485

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next