No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eam showfailoverpath

eam showfailoverpath

Function

The eam showfailoverpath command is used to query the path information about EAM port failover.

Format

eam showfailoverpath

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query the path information about EAM port failover.

admin:/diagnose>eam showfailoverpath 
 Source Port sourcePortId  Target Port targetPortId  available SPNpiv SSNpiv TPNpiv TSNpiv     srcPortLink  targetFreeLink  freeLinkEnough redundancy  FailoverStatus  
     CTE0.A3.P0           20300      CTE0.B3.P0 1000001020300          1      2      2      2      2              -1              -1               2            1               0  
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Source Port

Source port name.

sourcePortId

Source port ID.

Target Port

Target port name.

targetPortId

Target port ID.

available

Whether the failover path is available.

SPNpiv

Whether the source port supports N_Port ID Virtualization (NPIV).

SSNpiv

Whether the switch connected to the source port supports NPIV.

TPNpiv

Whether the target port supports NPIV.

TSNpiv

Whether the switch connected to the target port supports NPIV.

srcPortLink

Number of links on the source port.

targetFreeLink

Number of available links on the target port.

freeLinkEnough

Whether the number of available links on the target port is sufficient.

redundancy

Whether the links of the target port meet the redundancy requirement.

FailoverStatus

Failover status of the source port.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 722544

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next