No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change global_task_restrict switch

change global_task_restrict switch


The change global_task_restrict switch command is used to turn on or turn off the global task control switch. Global tasks do not include foreground I/O tasks, but include data repair, fault recovery, configuration, private I/O, and new device access tasks.


change global_task_restrict switch switch=?







  • "on": turns on the global task control switch.
  • "off": turns off the global task control switch.


Developer view

Usage Guidelines

You can execute the "show global_task_restrict switch" command to show the switch status.


Turn off the global task control switch.

developer:/>change global_task_restrict switch switch=off 
DANGER: You are about to enable or disable the global task management function. After this operation, if exceptions occur, some background tasks of the disk array are not allowed to be executed again for six hours. 
Suggestion: Before performing this operation, confirm that you want to enable or disable the global task management function. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 754145

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next