No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication short_time_out

change remote_replication short_time_out

Function

The change remote_replication short_time_outcommand is used to modify the timeout period of I/Os written to the secondary storage array during dual-write of synchronous remote replication to five seconds.

Format

change remote_replication short_time_out remote_replication_id=?

Parameters

Parameter

Description

Value

remote_replication_id=?

ID of a remote replication task.

To obtain the value, run "show remote_replication general" without parameters.

Views

Developer view

Usage Guidelines

  • This command is only used to modify the timeout period of the synchronous remote replication.
  • This command can be implemented only when the links between the primary storage array and the secondary storage array in the remote replication is normal.
  • This command can be implemented only when modification of the timeout period is supported by the primary storage array and the secondary storage array in the remote replication.

Example

Modify the remote I/O timeout period of remote replication "d8490b90ee140002" to five seconds.

developer:/>change remote_replication short_time_out remote_replication_id=d8490b90ee140002 
CAUTION: You are about to change the remote I/O timeout period of synchronous remote replication to 5 seconds. 
This operation may abnormally interrupt the synchronous remote replication. 
Suggestion: Before performing this operation, ensure that you set the timeout period of the specified remote replication to 5 seconds. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 666928

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next