No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal worm_info

show pal worm_info


The show pal worm_info command is used to query the WORM information of file systems. You can query information about WORM of a specific type by specifying parameters.


show pal worm_info file_system_id=?






File system ID.

To obtain the value, run the "show file_system general" command without parameters.


Developer view

Usage Guidelines



Query WORM information of file system "2".

developer:/>show pal worm_info file_system_id=2 

 Worm File System Information: 
 File System ID         : 2 
 Worm Type              : WORM_COMPLIANCE 
 Auto Lock              : on 
 Auto Delete            : off 
 Max Retention          : 70 (y) 
 Min Retention          : 3 (y) 
 Default Retention      : 70 (y) 
 Default Wait           : 2 (h) 
 Worm Clock Gap         : 0 (s) 

 Worm Root Apo          : 6 
 Scanning File ID       : 0 
 Last Scanned File ID : 0 
 Worm Scan Status       : WORM_TASK_IDLE 
 Fingerprint Task Status: WORM_TASK_IDLE 
 Worm Clock Status      : WORM_TASK_IDLE 
 Is Load                : true 
 Worm File System Count : 1 

 Compliance Clock       : 1425023159(s), Fri Feb  27 07:45:59 2015. 
 Expiry Date            : 3634088279(s), Tue Feb  27 04:57:59 2085.

System Response

The following table describes the parameter meanings.



File System ID

File system ID.

Worm Type

WORM type.

Auto Lock

Automatic protection mode.

Auto Delete

Automatic deletion mode.

Max Retention

Maximum protection period.

Min Retention

Minimum protection period.

Default Retention

Default protection period.

Default Wait

Default protection period of files that enter the protection state.

Worm Clock Gap

Relative difference (seconds) of the WORM clock time of remote replication.

Worm Root Apo

ID of the WORM file system queue.

Scanning File ID

ID of the file being scanned. If 0 is displayed, the scanning task ends.

Last Scanned File ID

ID of the last file scanned. If 0 is displayed, all files in the file system have been scanned in the last scan task.

Worm Scan Status

WORM scan status.

Fingerprint Task Status

Signature status.

Worm Clock Status

WORM clock status.

Is Load

WORM feature load status.

Worm File System Count

Total number of WORM file systems.

Compliance Clock

Time of the WORM regulation clock.

Expiry Date

Time when files (read-only snapshots) expire.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 756296

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next