No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change controller dma_type

change controller dma_type

Function

The change controller dma_type command is used to change the DMA mode of the controller enclosure. You can run this command to change the DMA mode of a controller enclosure.

Format

change controller dma_type controller_id=? dma_type=?

Parameters

Parameter

Description

Value

controller_id=?

ID of a controller.

To obtain the value, run "show controller general".

dma_type=?

Mode of DMA.

The value can be "CPU_DMA" or "PCIE_DMA", where:

  • CPU_DMA: The mode of CPU_DMA.
  • PCIE_DMA: The mode of PCIE_DMA.

Views

Developer view

Usage Guidelines

Suggestion: Run this command during off-peak hours. After setting the DMA mode, restart the controllers one by one to ensure service continuity.

Example

Set the DMA mode of the controller enclosure where controller 0A resides to "PCIE_DMA".

developer:/>change controller dma_type controller_id=0A dma_type=PCIE_DMA 
DANGER: You are about to change the DMA mode of the controller enclosure. The controllers must be restarted for the change to take effect. 
Suggestion: Before performing this operation, note the following: 
1. The DMA mode can be changed when services are running. The change does not affect ongoing services, but it takes effect only after the controllers are restarted. 
2. You only need to configure the DMA mode on one controller. If you configure the DMA mode on multiple controllers, the configuration of the last controller prevails. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 663815

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next