No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete omnilock open

delete omnilock open

Function

The delete omnilock open command is used to revoke open lock permission of files.

Format

delete omnilock open controller=? [ file_system_id=? ] [ file_id=? ] [ open_id=? ] [ client_ip=? ]

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF.

controller=?

Controller ID.

The value format is "XA", "XB", "XC", or "XD". "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".

open_id=?

Handle ID.

The value is a hexadecimal number ranging from 0 to FFFFFFFF FFFFFFF.

client_ip=?

Client IP address.

The value cannot be greater than 32 bytes.

file_id=?

File ID.

The value is a hexadecimal number, ranging from 0 to FFFFFFFF FFFFFFFF.

Views

Developer view

Usage Guidelines

None

Example

Revoke the open lock permission.

developer:/>delete omnilock open controller=0A 
WARNING: You are about to clear the client cache. This operation may cause the client CIFS service performance to deteriorate. 
Suggestion: Confirm that you need to clear the client cache. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 722825

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next