No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Qos show system_info

Qos show system_info


The Qos show system_info command is used to view system information related to the quality of service (QoS).


Qos show system_info




Diagnostic view

Usage Guidelines



View information about the CPU, license, submodule function status, and node function status.

admin:/diagnose>qos show system_info  
----------------------CPU INFO------------------------ 
CPU check timer                        : 10 seconds 
Current CPU usage                      : 50  
Sample CPU usage of recent 10 times : 0  0  0  0  0  0  0  0  0  0  
Increase delay level when cpu overload : 85  
--------------------LICENSE INFO---------------------- 
QoS license check flag                 : On 
QoS license valid function number      : 0 
QoS license valid resource number      : 0 
QoS used license capacity              : 0 GB 
QoS max license capacity               : 0 GB 
---------------SUBMODULE SWITCH INFO------------------ 
Io class and CPU control function flag : On 
Io statistic function flag             : On 
Front concurrent function flag         : Off 
BDM delay function flag                : Off 
---------------------NODE INFO------------------------ 
Cluster master id                      : 1 
Self node id                           : 0 
Configured node num                    : 2 
Online node bitmap                     : 3 
---------------------WORK STATUS---------------------- 
QoS work all ready or not              : Yes

System Response

The following table describes the parameter meanings.



CPU check timer

Timer of CPU overload check.

Current CPU usage

Average usage of the CPU.

Sample CPU usage of recent 10 times

10 CPU usages recently sampled.

Increase delay level when cpu overload

Watermark for the latency resulted from CPU overload.

QoS license check flag

Whether the QoS license is checked.

QoS license valid function number, valid resource number

Valid function number and valid resource number of the QoS license.

Io class and CPU control function flag

Flag of I/O class and CPU overload control.

Self engine

ID of the current engine.

Self node

ID of the current node.

Cluster master

ID of the primary node in the cluster.

BDM delay function flag

Flag of BDM latency control.

Front concurrent function flag

Flag of front-end concurrency control.

Io statistic function flag

Flag of I/O statistics.

QoS max license capacity

Maximum capacity of the QoS license.

QoS used license capacity

Used capacity of the QoS license.

Configured node num

Number of currently configured nodes.

Online node bitmap

Number of online node bitmaps.

QoS work all ready flag

Flag of whether the QoS work is ready.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 759614

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next