No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ss showdisk

ss showdisk

Function

The ss showdisk command is used to query status information about disks that are scanned for intelligently.

Format

ss showdisk -p poolId

ss showdisk -k diskId

Parameters

Parameter

Description

Value

-p poolId

ID of the disk domain.

To obtain the value, run the "show disk_domain general" command.

-k diskId

ID of the disk.

To obtain the value, run the "pmgr showdisk" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query status information about disks which are scanned for intelligently in disk domain "1".

admin:/diagnose>ss showdisk -p 1 
No DiskID  PoolID  Scan Status  UNC Num  Complete scan time 
----  ------  ------  -----------  -------  -------------------- 
  0 524      1         1        0        2016-05-31, 02:10:42 
  1 527   1         1        0        2016-05-31, 02:10:42 
  2 528      1         1        0        2016-05-31, 02:10:42 
  3 532      1         1        0        2016-05-31, 02:10:42 

 Total disk num: 4 
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

No

Number.

DiskID

Disk ID.

PoolID

Disk domain ID.

Scan Status

Scan status.

UNC Num

Number of UNC bad sectors that are scanned for.

Complete scan time

Time when the scan completes.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 718449

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next