No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete remote_replication_db

delete remote_replication_db


The delete remote_replication_db command is used to forcibly delete the DB information about a specified remote replication.


delete remote_replication_db remote_replication_db_index=? lun_id=?






Indicates the DB index of a remote replication.

Export the GDB and check the incorrect index.


Indicates the ID of a LUN.

To obtain the value, run "show lun general".


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when the remote replication with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete remote_replication_rsstype" command. Restart the system after running the commands.


To delete the DB information on LUN 0 about the remote replication whose db index is 0, run the following command:

developer:/>delete remote_replication_db remote_replication_db_index=0 lun_id=0 
DANGER: You are clearing the DB information about remote replication, this operation will forcibly delete DB information about remote replication. 
Suggestion: Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 723557

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next