No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain session

show domain session

Function

The show domain session command is used to show session information between a storage device and an AD domain.

Format

show domain session [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3. To obtain the value, run the "show controller general" command.

Views

Developer view, vstore developer view

Usage Guidelines

  • The "show domain session" command is executed to show session information between a storage device and an AD domain on the primary controller.
  • The "show domain session controller=?" command is executed to show session information between a storage device and an AD domain on a specified controller.

Example

Show session information between a storage device and an AD domain.

developer:/>show domain session controller=0A 
IP Address Session Info  
---------- ------------ 
192.168.36.62 WIN-AG3HC2JB5OU:1:1:0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

IP Address

Indicates the IP address of the domain controller.

Session Info

Session information between a storage device and an AD domain.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 667625

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next