No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change private_device band_adapt

change private_device band_adapt

Function

The change private_device band_adapt command is used to enable or disable bandwidth self-adaptation for replication links between private disk arrays.

Format

change private_device band_adapt private_device_id=? enable=?

Parameters

Parameter

Description

Value

private_device_id=?

Indicates the ID of a remote device.

To obtain the value, run "show remote_device general".

enable=?

Enables or disables bandwidth self-adaptation for replication links.

The value can be "yes" or "no", where:

  • "yes": enables bandwidth self-adaptation for replication links.
  • "no": disables bandwidth self-adaptation for replication links.

Views

Developer view

Usage Guidelines

You are not advised to enable bandwidth self-adaptation for replication links.

Example

Enable or disable bandwidth self-adaptation for replication links between private disk arrays.


developer:/>change private_device band_adapt private_device_id=0 enable=yes 
Command executed successfully. 

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 555495

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next