No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bootd

bootd

Function

The bootd command is used to boot images in the flash memory.

Format

bootd

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Boot images in the flash memory.

Hi1710_UBOOT> bootd 
DRAM TEST OK 
### CRAMFS loading '/boot/uImage-dtb' to 0x8a000000 
### CRAMFS load complete: 1782552 bytes loaded to 0x8a000000 
### CRAMFS loading '/boot/initrd-small' to 0x8b000000 
### CRAMFS load complete: 1232149 bytes loaded to 0x8b000000 
## Booting kernel from Legacy Image at 8a000000 ... 
 Image Name: 3.10.53-HULK2 
 Image Type: ARM Linux Kernel Image (uncompressed) 
 Data Size: 1782488 Bytes = 1.7 MiB 
 Load Address: 81808000 
 Entry Point:  81808000 
 Verifying Checksum ... OK 
## Loading init Ramdisk from Legacy Image at 8b000000 ... 
 Image Name: Ramdisk Image 
 Image Type: ARM Linux RAMDisk Image (uncompressed) 
 Data Size: 1232085 Bytes = 1.2 MiB 
 Load Address: 00000000 
 Entry Point:  00000000 
 Verifying Checksum ... OK 
 Loading Kernel Image ... OK 
OK 

Starting kernel ... 

[ 0.000000] Booting Linux on physical CPU 0x0 
[ 0.000000] Initializing cgroup subsys cpuset

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 559808

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next