No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
recon debugshowstart

recon debugshowstart

Function

The recon debugshowstart command is used to query information about the reconstruction progress.

Format

recon debugshowstart poolId reconType diskId

Parameters

Parameter

Description

Value

poolId

Disk domain ID.

To obtain the value, run the "show disk_domain general" command.

reconType

Reconstruction type.

Based on the disk reconstruction type, the value can be:

  • "8": indicates disk reconstruction.
  • "9": indicates recovery reconstruction.
  • "12": indicates pre-copy.
  • "13": indicates partial reconstruction.

diskId

Disk ID.

To obtain the value, run the "pmgr showalltask" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query information about the reconstruction progress.

admin:/diagnose>recon debugshowstart 0 9 533 
debugReconstartTask rate = 2%, totalsize = 96575, finishsize = 2582, current speed = 0, remaintime =  2292  
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

debugReconstartTask rate

Reconstruction completion rate.

totalsize

Total capacity.

finishsize

Capacity of the disk that has finished reconstruction.

current speed

Current reconstruction speed.

remaintime

Remaining time.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 548723

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next