No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showclm

sys showclm


The sys showclm command is used to view cluster locks.


sys showclm




Diagnostic view

Usage Guidelines



View cluster clocks.

admin:/diagnose>sys showclm 
 clm status : master is normal, proxy is normal 
 active nodes  : 0xf(bit is set for active) 
 master node : 0 
 local  info : node(0), version(1), status(0) 
 master record : proxy id lock version 
                 -------- ------------ 
                  node 0       1 
                  node 1       1 
                  node 2       1 
                  node 3       1 
                  node 4      -1 
                  node 5      -1 
                  node 6      -1 
                  node 7      -1 
                  node 8      -1 
                  node 9      -1 
                  node 10     -1 
                  node 11     -1 
                  node 12     -1 
                  node 13     -1 
                  node 14     -1 
                  node 15     -1

System Response

The following table describes the parameter meanings.



lock version

Lock version. 1 indicates that the lock is powered on once. The initialization value is -1.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 753305

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next