No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
phyread

phyread

Function

The phyread command is used to read values from the PHY register.

Format

phyread <phy_addr> <reg_addr>

Parameters

Parameter

Description

Value

phy_addr

PHY address on the MDIO bus.

Enter the value as required.

reg_addr

Offset address of the PHY register.

Enter the value as required.

Modes

serial port mode

Usage Guidelines

The LAN switch chip must be used.

Example

Read values from the PHY register.

Hi1710_UBOOT> phyread 0 0x16 
read phy register 22 : 0xffff

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 561114

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next