No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dlm ccdb_receive_event

show dlm ccdb_receive_event

Function

The show dlm ccdb_receive_event command is used to view ccdb historical received event information.

Format

show dlm ccdb_receive_event controller=?

Parameters

Parameter

Description

Value

controller=?

Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

Run the "show dlm ccdb_receive_event" command to view ccdb historical event information.

Example

View ccdb historical received event information.

developer:/>show dlm ccdb_receive_event controller=0A 
Sequence Local Node ID Subscribe Event Event Version State Source Node ID Node ID Sequence Number Time  
 -------- ------------- --------------- ------------- ---------------- -------------- ------- --------------- ---------------------  
 0 0 1 7 <node_online> 0 0 0 [2015-04-28 16:40:00]  
 1 0 1 7 internal_task 0 0 2 [2015-04-28 16:40:07]  
 2 0 1 7 internal_task 0 0 3 [2015-04-28 16:40:07] 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Sequence

Sequence number.

Local Node ID

Local node ID.

Subscribe Event

Event subscribtion.

Event Version

Event version.

State

Status.

Source Node ID

Source node ID.

Node ID

Node ID.

Sequence Number

Sequence number.

Time

Time.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 669251

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next