No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traceroute6

traceroute6

Function

The traceroute6 command is used to show the route to the destination.

Format

traceroute6 -n [ -FV ] [ -f first_ttl ] [ -m max_hops ] [ -p port ] [ -S source_addr ] [ -I interface ] [ -g gateway ] [ -t tos ] [ -w timeout ] [ -q nqueries ] host [ packetlen ]

Parameters

Parameter

Description

Value

host

Host name or host IP.

Host name or host IP.

n

Do not try to map IP addresses to host names when displaying them.

None.

F

Set the "Don't Fragment" bit.

None.

V

Print the version and exit.

None.

f

Specifies with what TTL to start.

Integer.

m

The maximum number of hops traceroute will probe.

Integer.

p

The UDP destination port base traceroute will use.

Integer.

S

Chooses an alternative source address.

IP.

I

The interface through which to traceroute should send packets.

Integer.

g

Tells traceroute to add an IP source routing option to the outgoing packet that tells the network to route the packet through the specified gateway.

IP.

t

Set the IP Type of Service (TOS) and Precedence value.

Integer.

w

Wait for timeout seconds before sending the next probe packet.

Integer.

q

The number of probe packets per hop.

Integer.

packetlen

Length of packet.

Integer.

Modes

Minisystem mode

Usage Guidelines

None

Example

Show the route from the storage to the 2607:f8b0:400a:800::1010.

Storage:minisystem>traceroute6 -n 2607:f8b0:400a:800::1010 
traceroute to 2607:f8b0:400a:800::1010 (2607:f8b0:400a:800::1010), 30 hops max, 40 byte packets 
 1 2607:f740:e::2 1.944 ms 1.891 ms 1.845 ms 
 2 2001:418:0:5000::720 1.876 ms 1.866 ms 1.843 ms 
 3 2001:418:0:2000::1e1 2.459 ms 1.812 ms 2.588 ms 
 4 2001:504:0:4:0:1:5169:1 1.763 ms !X 1.736 ms !X 1.722 ms !X

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 667338

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next