No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d fancellinfo

cliget -d fancellinfo

Function

The cliget -d fancellinfo command is used to view information about fans.

Format

cliget -d fancellinfo

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

View the in-position status, speed level, rotational speed, health status, running module, and working status of fans.

administrator@CTRL_D / $ cliget -d fancellinfo 
the FAN mode: Manually 
the FAN Sleep State: Run 
the FAN0's level: 8 
the FAN0's Speed: 4560 
the FAN0's speed State: Health 
the FAN0's PwmState: Health 
the FAN0's FgState: Health 
the FAN1's level: 8 
the FAN1's Speed: 4560 
the FAN1's speed State: Health 
the FAN1's PwmState: Health 
the FAN1's FgState: Health 
the FAN2's level: 8 
the FAN2's Speed: 4200 
the FAN2's speed State: Health 
the FAN2's PwmState: Health 
the FAN2's FgState: Health 
the FAN3's level: 8 
the FAN3's Speed: 4440 
the FAN3's speed State: Health 
the FAN3's PwmState: Health 
the FAN3's FgState: Health 
the FAN4's level: 8 
the FAN4's Speed: 4680 
the FAN4's speed State: Health 
the FAN4's PwmState: Health 
the FAN4's FgState: Health 
the FAN5's level: 8 
the FAN5's Speed: 4560 
the FAN5's speed State: Health 
the FAN5's PwmState: Health 
the FAN5's FgState: Health 
the fanboard's FAN Sleep State: Run 
the FAN6's level: 5 
the FAN6's Speed: 3540 
the FAN6's speed State: Health 
the FAN7's level: 5 
the FAN7's Speed: 3600 
the FAN7's speed State: Health 
the FAN8' is not present. 
the FAN9' is not present. 
the FAN10's level: 5 
the FAN10's Speed: 3690 
the FAN10's speed State: Health 
the FAN11's level: 5 
the FAN11's Speed: 3630 
the FAN11's speed State: Health

System Response

The following table describes the parameter meanings.

Parameter

Meaning

the FAN mode

Working mode of the fan (manual or automatic).

the FAN Sleep State

Working status of the fan (sleep or running).

the FAN0~5's level

Speed level of the fans whose IDs range from 0 to 5.

the FAN0~5's Speed

Rotational speed of the fans whose IDs range from 0 to 5.

the FAN0~5's speed State

Rotational speed status of the fans whose IDs range from 0 to 5.

the FAN0~5's PwmState

Pwm health status of the fans whose IDs range from 0 to 5.

the FAN0~5's FgState

Fg health status of the fans whose IDs range from 0 to 5.

the fanboard's FAN Sleep State

Working status of the fan control board (sleep or running).

the FAN6~11's level

Speed level of the fans whose IDs range from 6 to 11 on the fan control board.

the FAN6~11's Speed

Rotational speed of the fans whose IDs range from 6 to 11 on the fan control board.

the FAN6~11's speed State

Rotational speed health status of the fans whose IDs range from 6 to 11 on the fan control board.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138381

Views: 555618

Downloads: 35

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next