No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show cluster general

show cluster general


The show cluster general command is used to query the IPv4 base address and IPv4 address division mode and networking mode of the cluster.


show cluster general




Developer view

Usage Guidelines

Run the show cluster general command to show the basic configuration information about the cluster.


To run the following command.

developer:/>show cluster general 

  Ipv4 Base Address  Network Mode  Subnetting Mode 
  -----------------  ------------  ---------------         Switch Mode Mask24 Mode  

System Response

The following table describes the parameter meanings.



Ipv4 Base Address

IPv4 base address.

Network Mode

Networking mode.

Subnetting Mode

IPv4 subnetting mode.

Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 754093

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next