No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
epl linkq

epl linkq


The epl linkq command is used to view the I/O queue on the link.


epl linkq [ -r ]






Indicates whether to clear historical statistics when the command is executed.



Diagnostic view

Usage Guidelines



View the I/O queue on the link.

admin:/diagnose>epl linkq 
EPL Link Queue Info: localNid(0). CurC(current concur). MaxC(max concur). MaxJ(max delay in jiffies) 
 Link Stat sdevId  depth curQue maxQue sQ: curC maxC maxJ wQ0: CurC MaxC MaxJ wQ1: CurC MaxC MaxJ wQ2: CurC MaxC MaxJ wQ3: CurC MaxC MaxJ 
 000000h Up 32768 512 0      568 sQ: 0 499  524  wQ0: 0 1 1 wQ1: 0 5 1 wQ2: 0 109  3 wQ3: 0 3 1 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 759617

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next