No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system general

show system general

Function

The show system general command is used to query the general system information.

Format

show system general

Parameters

None

Views

Guest, Manufacturer view, Upgrade view

Usage Guidelines

None

Example

Query the general system information. The command output varies depending on a specific product. In the following command output, the fields related to the product model are replaced by "X".

admin:/>show system general 
  System Name         : XXX.Storage  
  Health Status       : Normal  
  Running Status      : Normal  
  Total Capacity      : 3.186TB  
  SN                  : 210235G6EHZ0CX0000XX  
  Location            :  
  Product Model       : XXXX  
  Product Version  : VX00R00XCXX  
  High Water Level(%) : 80  
  Low Water Level(%)  : 30  
  WWN                 : XXXX  
  Time                : 2015-07-07/15:34:05 UTC+08:00 
  Patch Version       : SPCXXX SPHXXX 
  Description         :

System Response

The following table describes the parameter meanings.

Parameter

Meaning

System Name

Device name.

Health Status

Indicates the health status.

Running Status

Indicates the running status.

Total Capacity

Total capacity of all member disks.

SN

Device serial number.

Location

Device location.

Product Model

Product model.

Product Version

Product version.

High Water Level(%)

High water level that is the upper threshold for the amount of the dirty data stored in the cache. When the amount of the dirty data stored in the cache reaches the high water level, the cache starts to synchronize dirty data into disks.

Low Water Level(%)

Low water level that is the low threshold for the amount of dirty data stored in the cache. When the amount of the dirty data stored in the cache falls to the low water level, the cache stops synchronizing dirty data into disks.

Time

Current time.

Patch Version

Patch version.

WWN

WWN information of the device.

Description

Device description.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 698294

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next