No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair write_mode

change hyper_metro_pair write_mode

Function

The change hyper_metro_pair write_mode command is used to set the write mode of a HyperMetro pair to tune the performance of HyperMetro IO lock.

Format

change hyper_metro_pair write_mode pair_id=? write_mode=? [ prefetch_mode=? | prefetch_size=? ]

Parameters

Parameter

Description

Value

pair_id=?

ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command without any parameters to obtain the value.

write_mode=?

Write mode of host.

The value is "none" or "sequential" or "reverse" or "random", where:

  • "none": none I/O write mode.
  • "sequential": sequential I/O write mode.
  • "reverse": reverse I/O write mode.
  • "random": random I/O write mode.

prefetch_mode=?

Prefetch mode.

The value is "max" or "scale" or "block_kb" or "block_mb" or "block_gb", where:

  • "max": max prefetch size,only for "sequential" and "reverse" write mode.
  • "scale": prefetch by a scale of io size.
  • "block_kb": prefetch by a fixed size in KB.
  • "block_mb": prefetch by a fixed size in MB.
  • "block_gb": prefetch by a fixed size in GB.

prefetch_size=?

Prefetch size.

-

Views

Developer view, Engineer view

Usage Guidelines

None

Example

Set write mode as random, and the max prefetch size is 64 KB for a HyperMetro pair whose ID is "1".

engineer:/>change hyper_metro_pair write_mode pair_id=1 write_mode=random prefetch_mode=block_kb prefetch_size=64 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 723629

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next