No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change log_rate resume

change log_rate resume

Function

The change log_rate resume command is used to reduce the log print restoration time.

Format

change log_rate resume controller_id=? gid=? multiple=?

Parameters

Parameter

Description

Value

controller_id=?

Controller ID.

The value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3.

gid=?

Process group ID.

The value must be an integer from 1 to 4,294,967,294 or "all", where:

  • an integer between 1 and 4,294,967,294:specific GID.
  • "all":all GIDs.

multiple=?

Multiple by which the log print restoration time is to be reduced.

The value must be an integer from 1 to 4,294,967,295.

Views

Developer view, Engineer view

Usage Guidelines

When "gid" is set to "all", the log print restoration time of all GIDs decreases by specific times.

Example

Reduce the log print restoration time of the process group whose GID is "2" by "10" times on controller "0A".

developer:/>change log_rate resume controller_id=0A gid=2 multiple=10 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138381

Views: 663812

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next