No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_copy general

change lun_copy general

Function

The change lun_copy general command is used to modify the attributes of a logical unit number (LUN) copy. By running this command, you can change the name and LUN copy rate of a LUN copy.

Format

change lun_copy general lun_copy_id=? { name=? | copy_speed=? } *

Parameters

Parameter

Description

Value

lun_copy_id=?

ID of a LUN copy.

To obtain the value, run "show lun_copy general".

name=?

An updated name of a LUN copy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

copy_speed=?

Rate of a LUN copy task.

The value can be:

  • "Low": indicates the low copy speed.
  • "Middle": indicates the medium copy speed.
  • "High": indicates the high copy speed.
  • "Highest": indicates the highest copy speed.

Level

Administrator

Usage Guidelines

Before running this command, ensure that the selected LUN copy is in the normal state.

Example

Modify the attributes of LUN copy "0", where the updated rate of the LUN copy task is "Middle", and the updated LUN copy name is "test".

admin:/>change lun_copy general lun_copy_id=0 name=test copy_speed=Middle 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 312859

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next