No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add remote_device link iscsi

add remote_device link iscsi

Function

The add remote_device link iscsi command is used to add Internet Small Computer System Interface (iSCSI) links. Run this command to connect the storage system to a remote device through iSCSI links.

Format

add remote_device link_iscsi remote_device_id=? local_controller=? local_port_id=? ip=? [ recovery_policy=? ] [ fast_write_enabled=? ]

Parameters

Parameter

Description

Value

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

local_controller=?

ID of a local controller to which a link connects.

The value is in the format of "XA", "XB", "XC" or "XD", where "X" must an integer ranging from 0 to 3.

local_port_id=?

ID of an iSCSI host port.

To obtain the value, run "show port general".

ip=?

IP address of a remote device.

-

recovery_policy=?

Link recovery policy.

The value can be "automatic" or "manual", where:

  • "automatic": automatic recovery.
  • "manual": manual recovery.

The default value is "automatic".

fast_write_enabled=?

Switch of fast write.

The value can be "yes" or "no", where:

  • "yes": Fast write will be enabled.
  • "no": Fast write will not be enabled.

The default value is "yes".

Level

Administrator

Usage Guidelines

None

Example

Add an iSCSI link to remote device "0", where the local controller is controller "0A", the port ID is "ENG0.A4.P0", and the IP address of the remote device is "192.168.5.2". The ID and output vary depending on a specific product.

admin:/>add remote_device link iscsi remote_device_id=0 local_controller=0A local_port_id=ENG0.A4.P0 ip=192.168.5.2 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321644

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next