No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system dst

show system dst

Function

The show system dst command is used to query the daylight saving time (DST) settings of the storage system.

Format

show system dst continent=? capital=?

Parameters

Parameter

Description

Value

continent=?

General area (continent or region) where the storage system resides.

The value can be "Africa", "America", "Antarctica", "Arctic", "Asia", "Atlantic", "Australia", "Etc", "Europe", "Indian", "Pacific", or "other".

capital=?

Specific area (major city, province, or state) where the storage system resides.

The value varies depending on the continent=? parameter. Refer to the information displayed on the CLI.

Level

Guest

Usage Guidelines

The storage system automatically sets the DST based on the configured time zone. The DST is not applicable to some time zones.

Example

To query the DST settings of the storage system, run the following command. The command output varies depending on CLI.

admin:/>show system dst continent=Africa capital=Cairo 

  Time Zone            : Africa/Cairo 
  Begin Time           : 04-25 18:00:00  
  End Time             : 09-26 18:00:00  
  Adjust Time(Minutes) : 60             
  Config Mode          : Date

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Time Zone

Time zone name.

Begin Time

Start time of daylight saving time.

Adjust Time(Minutes)

During the time of daylight saving time adjustment.

End Time

End time of daylight saving time.

Config Mode

Configuration method of daylight saving time.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 318537

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next