No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system permission_hardening

change system permission_hardening

Function

The change system permission_hardening command is used to configure the system permission hardening switch. Run this command to enable or disable the system permission hardening function.

Format

change system permission_hardening enable=?

Parameters

Parameter

Description

Value

enable=?

Switch of system permission hardening.

The value can be "yes" or "no", where:

  • "yes": The system permission hardening function will be enabled.
  • "no": The system permission hardening function will be disabled.

Level

Super administrator

Usage Guidelines

None

Example

  • Turn on the system permission hardening switch for the storage system.
    admin:/>change system permission_hardening enable=yes 
    WARNING: You are about to enable system permission hardening. This operation takes effect only after a new window is opened. 
    Suggestion: Before performing this operation, ensure that system permission hardening needs to be enabled. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Turn off the system permission hardening switch for the storage system.
    admin:/>change system permission_hardening enable=no 
    WARNING: You are about to disable system permission hardening. This operation changes the permissions of some system files and takes effect only after a new window is opened. 
    Suggestion: Before performing this operation, ensure that system permission hardening needs to be disabled. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 311016

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next