No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp port

show snmp port

Function

The show snmp port command is used to query the listening port of the SNMP service.

Format

show snmp port

Parameters

None

Level

Guest

Usage Guidelines

None

Example

To query the listening port of the SNMP service, run the following command.

admin:/>show snmp port 
  SNMP Listening Port : 161

System Response

The following table describes the parameter meanings.

Parameter

Meaning

SNMP Listening Port

The listening port of the SNMP service.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 312832

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next