No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool tier

show storage_pool tier

Function

The show storage_pool tier command is used to query the information on existing storage tiers in a storage pool.

Format

show storage_pool tier pool_id=?

Parameters

Parameter

Description

Value

pool_id=?

0peration type.

To obtain the value, run the "show storage_pool general" command in the guest view.

Level

Guest

Usage Guidelines

None

Example

Querying information about storage tiers in the storage pool whose ID is 0.

admin:/>show storage_pool tier pool_id=0 
Name : Performance  
Pool ID : 0  
Health Status : Normal  
Running Status : Online  
Capacity : 500.000GB  
Allocated Capacity : 6.000GB  
Free Capacity : 494.000GB 
RAID Level : RAID6 
Capacity Shrink Range : [100.000GB, 500.000GB] 
RAID Disk Number : 6  
Stripe Depth : 128.000KB 
Estimated Move-up Data : 0.000B  
Estimated Move-down Data : 0.000B

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

Storage pool name.

Pool ID

Storage pool ID.

Health Status

Health status.

Running status

Operating status.

Capacity

Total capacity of the storage pool.

Allocated Capacity

Used capacity of the storage pool.

Free Capacity

Total free capacity of the storage pool.

RAID Level

RAID level of the storage pool.

Capacity Shrink Range

Maximum capacity reduction range of the storage pool.

RAID Disk Number

RAID disk number of the storage pool.

Stripe Depth

Stripe depth of the storage pool.

Estimated Move-up Data

Amount of data to be migrated to a higher performance tier of the storage pool.

Estimated Move-down Data

Amount of data to be migrated to a lower performance tier of the storage pool.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 317676

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next