No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault start

change hypervault start

Function

The change hypervault start command is used to back up file system data.

Format

change hypervault start hypervault_id=? action_type=? [ custom_name=? | policy_id=? ]

Parameters

Parameter

Description

Value

hypervault_id=?

ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

action_type=?

Manual backup type.

The value is "local" or "remote", where:

  • "local": to start local backup.
  • "remote": to start remote backup.

custom_name=?

Custom name of HyperVault copy.

The value consists of 1 and 31 ASCII characters including digits, letters,and underscores (_).

policy_id=?

ID of the HyperVault policy.

To obtain the value, run the "show hypervault_policy general" command without parameters.

Level

Administrator

Usage Guidelines

None

Example

  • Back up the primary file system for HyperVault task "9747215445131264".
    admin:/>change hypervault start hypervault_id=9747215445131264 action_type=local  
    Command executed successfully.
  • Back up the primary and remote file system for HyperVault task "9747215445131264".
    admin:/>change hypervault start hypervault_id=9747215445131264 action_type=remote 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320393

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next