No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete consistency_group

delete consistency_group


The delete consistency_group command is used to delete consistency groups.


delete consistency_group consistency_group_id=? [ is_local_delete=? ]






ID of a consistency group.

To obtain the value, run "show consistency_group general".


Whether or not to delete the local consistency group.

The value can be:

  • yes: The local consistency group will be deleted.
  • no: The local consistency group will not be deleted.



Usage Guidelines

  • This command will delete the selected consistency group from the system.
  • If the consistency group contains remote replication pairs, remove the pairs by following the procedure described in "remove consistency_group remote_replication".
  • Before running this command, ensure that the selected consistency group is exactly the one you want to delete.
  • If the consistency group contains members, it can be deleted only when it is in the Split state or when its Health Status is Fault. If the consistency group contains no members, it can be deleted when it is in the Normal state.


To delete consistency group "200bc79b99520000", run the following command.

admin:/>delete consistency_group consistency_group_id=200bc79b99520000 
DANGER: You are about to delete consistency group.This operation will delete information about the consistency group from the system. 
Suggestion: Before performing this operation, ensure that the selected consistency group is correct. 
Have you read danger alert message carefully(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320157

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next