No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot deactivate

change snapshot deactivate

Function

The change snapshot deactivate command is used to deactivate snapshots.

Format

change snapshot deactivate { snapshot_id=? | snapshot_id_list=? }

Parameters

Parameter

Description

Value

snapshot_id=?

ID of a snapshot.

To obtain the value, run "show snapshot general".

snapshot_id_list=?

ID of a snapshot.

To obtain the value, run "show snapshot general".

You can specify multiple snapshot IDs separated by commas (,), or ID range separated by hyphens (-), such as: 0, 5-8.

Level

Administrator

Usage Guidelines

  • Only the snapshots in the state of activated can be deactivated.
  • Running this command deletes the data of the selected snapshot.
  • Before running this command, ensure that the selected snapshot is exactly the one that you want to deactivate.
  • If the snapshot is the primary LUN or secondary LUN of a LUN copy, the snapshot cannot be deactivated.

Example

  • Deactivate snapshot "10".
    admin:/>change snapshot deactivate snapshot_id=10 
    DANGER: You are about to deactivate snapshot. This operation will delete the snapshot data. 
    Suggestion: Before performing this operation, ensure that the selected snapshot is correct and considered to have no useful data. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Deactivate snapshots "11","12", and "13".
    admin:/>change snapshot deactivate snapshot_id_list=11,12,13 
    DANGER: You are about to deactivate snapshot. This operation will delete the snapshot data. 
    Suggestion: Before performing this operation, ensure that the selected snapshot is correct and considered to have no useful data. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 311842

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next