No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change call_home general

change call_home general


The change call_home general command is used to set the Call Home service.


change call_home general switch=?






Whether the Call Home service is enabled.

The value can be "on" or "off".


Super administrator

Usage Guidelines

Before executing this command, confirm that the basic configurations of the Call Home service are correct.


Set the Call Home service.

admin:/>change call_home general switch=on 
CAUTION: You are about to set the Call Home service. The Call Home service can periodically send health status data of the storage array to the technical support center. The data includes fault diagnosis data, performance statistics, logs, and configurations. The Call Home service does not send any application data or personal privacy data. 
Suggestion: Enable the Call Home service to get remote support from the technical support center. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321617

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next