No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add consistency_group remote_replication

add consistency_group remote_replication

Function

The add consistency_group remote_replication command is used to add remote replication tasks to a consistency group.

Format

add consistency_group remote_replication consistency_group_id=? remote_replication_id=?

Parameters

Parameter

Description

Value

consistency_group_id=?

ID of a consistency group.

To obtain the value, run "show consistency_group general".

remote_replication_id=?

ID of the remote replication tasks that you want to add to a consistency group.

To obtain the value, run "show remote_replication general".

Level

Administrator

Usage Guidelines

  • You can run this command only on the primary end for a consistency group.
  • You can add only a remote replication task that is in the normal, synchronizing or split state to a consistency group.
  • This command succeeds only when the replication mode of the remote replication task that you want to add is the same as that of the selected consistency group.
  • A synchronous consistency group can only contain synchronous instead of asynchronous remote replication tasks.
  • An asynchronous consistency group can only contain asynchronous instead of synchronous remote replication tasks.

Example

To add remote replication task whose ID is respectively "9747215445131234" to consistency group "9747215445131264", run the following command:

admin:/>add consistency_group remote_replication consistency_group_id=9747215445131264 remote_replication_id=9747215445131234 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320337

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next