No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create alarm test

create alarm test

Function

The create alarm test command is used to simulate the reporting of fault alarms.

Format

create alarm test

Parameters

None

Level

Administrator

Usage Guidelines

  • This command is used to test the alarm reporting function of the device. After the test is complete, clear the alarm reported during the test.
  • This command is used to report a specific fault alarm. If this fault alarm already exists, the newly reported fault alarm is invalid.

Example

Simulating the reporting of fault alarms.

admin:/>create alarm test 
Send test alarm successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 320483

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next