No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show replication_connection_status general

show replication_connection_status general


The show replication_connection_status general command is used to query information about I/Os on remote replication links between the local array and a specified remote array.


show replication_connection_status general remote_device_id=?






ID of a remote device.

To obtain the value, run "show remote_device general".



Usage Guidelines



Query information about I/Os on remote replication links between the local array and a specified remote array.

admin:/>show replication_connection_status general remote_device_id=0 
  Pair ID           Remote Device ID  Local LUN Name  Remote LUN Name  Connection Status               Recommended Controller  Is Primary 
  ----------------  ----------------  --------------  ---------------  ------------------------------  ----------------------  ---------- 
  74a063ff51090000  0                 LUN0010000      LUN0010000       All I/Os need to be forwarded 0B                      Yes          
  74a063ff51090001  0                 LUN0010001      LUN0010001       All I/Os need to be forwarded 0A                      Yes          
  74a063ff51090002  0                 LUN0010002      LUN0010002       All I/Os need to be forwarded 0D                      Yes          
  74a063ff51090003  0                 LUN0010003      LUN0010003       All I/Os need to be forwarded 0C                      Yes          
  74a063ff51090004  0                 LUN0010004      LUN0010004       All I/Os need to be forwarded 0B                      No

System Response

The following table describes the parameter meanings.



Pair ID

Remote replication ID.

Remote Device ID

Remote device ID.

Remote LUN Name

Remote LUN Name.

Local LUN Name

Local LUN Name.

Connection Status

Connection Status.

Recommended Controller

Recommended controller to be switched.

Is Primary

Whether the array is the primary array of remote replication.

Updated: 2019-07-12

Document ID: EDOC1000138382

Views: 321003

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next